FridgeWize - LED Lights & Sensors - Fridgewize
page,page-id-16338,page-template-default,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.0,wpb-js-composer js-comp-ver-4.12,vc_responsive

LED Light & Sensors


1810LX LED Fixture

The 1810LX LED Fixtures are four-foot vapor proof fixtures that reach full light level immediately, even in the lowest temperatures, and is specifically designed for wet and low temp environments.

  • Unbreakable polycarbonate enclosure
  • Pre-installed Surface Mount LED Strips mean no more tubes
  • 39W total, 0.33 amps, 100-277VAC (universal input)
  • System Luminance: 3770 lumens
  • 96 lumens/watt
  • Luminaire Rating IP-65 for wet and cold environments
  • No ultraviolet emissions
  • Constant Current LED
  • 4500K color temperatures
  • LM-79 & LM-80 Tested
  • Rated 50,000+ hr life
  • Wet and cold applications
  • High output LED technology
  • Best-in-class efficiency
  • Designed for high ceilings and large work rooms with great foot candle requirements; getting the same output from fewer fixtures
  • Four-foot vaporproof fixture
  • Does not attract insects
  • Reduced lighting wattage and heat generation
  • Easily replaces less energy-efficient lighting
  • Fixture: UL Listed for US & Canada
  • Class 2 Power Supply is a ANSI/UL-CSA recognized component and bears the RoHS and CE marks
  • Exceeds Federal Energy Act requirements
  • RoHS compliant and mercury free
  • Payback in as little as 6 months
  • Low energy, lower utility cost
  • 5 year limited warranty

1808 Slim Line LED Fixture

The 1808 Slim Line LED Fixture  is a low profile, high impact Lexan globe with anti-glare technology that can replace inefficient lighting. This LED fixture is specifically designed for wet and low-temp environments.

  • Material: Lexan lens; aluminum housing
  • Mounting: Surface Mount
  • Electrical: 1160 Total Lumens; 90-305 VAC, 50/60 Hz; 86 Lumens/Watt; .12 Amps; Watts: 13.5 W; Power factor: 0.9; CRI 85
  • Safety Standards: RoHS; UL listed US and Canada; File No. E333932; NSF Listed; IP-65; Patent Applied
  • Low profile, high impact Lexan globe with anti-glare technology
  • Preferred fixture for replacing inefficient lighting
  • Designed to reduce electrical usage by 85%
  • Minimal heat generation
  • Rated for 50,000+ hours life
  • Maximize energy savings and lower utility costs
  • Exceeds Federal Energy Act requirements
  • 5 year limited warranty on the light engine
  • Energy Star Certified
  • LM-79 Tested
Screen Shot 2015-01-22 at 1.08.33 PM

1901A Motion Sensor

The 1901A Motion Sensor is specifically engineered for installation in walk-in coolers and freezers, allowing for reliable operation in extreme temps. This fixture boasts a gasketed water-tight enclosure to prevent moisture and dust from entering the sensors and affective occupancy detection.

  • Low Bay Sensor: High density optic lens set covers a 20 ft. (7.3m) diameter with ceiling height up to 20 ft. (6.1m)
  • High Bay Sensor: Same as the low bay sensor except with ceiling height from 20 ft. (6.1m) to 40 ft. (12.2m)
  • Polycarbonate material
  • Voltage: 120-277 VAC at 50/60hz
  • Load: 120 VAC with 0-800 W ballast; 277 VAC with 0-1200 W ballast
  • Time Delay: Convenient DIP switch adjusts from 10 seconds to 20 minutes after Walk-in is exited
  • Temperature Ratings: -20°F (-28.9°C) minimum; 160°F (60°C) maximum.
  • Electrical Connection: 1/2 NPT thread, 13-1/2″ (342.9 mm) AWG wire.
  • Specifically engineered for installation in walk-in coolers and freezers
  • Gasketed water-tight enclosure prevents moisture and dust from entering the sensor and affecting occupancy detection
  • Passive infrared sensor detects motion and turns lights on at temperatures below freezing.
  • Uses DIP switches to set time delay and PIR sensitivity
  • Horizontal or vertical mounting for use will all Kason light fixtures
  • Reliable operation in extreme temperatures
  • IP65, UL-listed US and Canada for wet locations and NSF
  • Maximize energy saving
  • Meets federal regulations for walk-ins

5ft and 6ft Vertical Reach-In LED Fixtures

The Immersion RV40 system operates on as little as 16 watts of energy per door, reducing case lighting energy consumption by up to 85% compared to T12HO fluorescent systems. This system is dimmable and is also compatible with occupancy sensors for even greater energy savings.

  • Operates in as little as 16 watts of energy per door
  • Up to 85% reduction in case lighting energy consumption
  • Rated for 50,000+ hours life
  • Provides over 5.7 years and 24 hours of operation without having to change a light out
  • Available in 5ft and 6th lengths and multiple color temperatures
  • Easily replaces inefficient fluorescent lighting
  • Delivers bright, uniform light across package facings
  • Dimmable system compatible with occupancy sensors for even greater energy savings
  • Reduces compressor’s need to work hard, providing additional indirect energy savings
  • Does not require warm-up time
  • Maximize energy savings up to 85%
  • Enhances visual appeal of products
  • Significant maintenance cost savings
  • RoHS and NSF compliant
  • 5 year limited warranty